Omron Easy Cuff HEM-RML31 Mode D'emploi page 3

Maintenance
This cuff fulfils the previsions of EC directive 93/42/EEC (Medical Device Directive) as well as EN1060
Non-invasive sphygmomanometers Part 1: General Requirements and Part 3: Supplementary
requirements for electromechanical blood pressure measuring systems.
This OMRON product is produced under the strict quality system of OMRON HEALTHCARE Co., Ltd., JAPAN.
Product Description
Model
Arm Circumference
Measurement Range
Accuracy
Service lifetime
3. Secure closed with the fabric fastener.
Taking measurements on the right arm
The air tube will be at the side of your elbow.
Be careful not to rest your arm on the air tube.
Note: The blood pressure can differ between the
right arm and the left arm, and therefore also
the measured blood pressure values can be
different. OMRON recommends to always use
the same arm for measurement. If the values
between both arms differ substantially, please
check with your physician which arm to use for
your measurement.
• Use a soft and dry cloth, or a soft and moistened
cloth and neutral soap to clean on the arm cuff.
• Do not use petrol, thinners of similar solvents to
clean the arm cuff.
• Do not store the arm cuff to extreme temperatures,
humidity, direct sunlight, dust or corrosive vapours.
• Do not bend or crease the air tube excessively.
Blood pressure monitor cuff
Easy Cuff HEM-RML31 (HEM-RML31-E)
22 - 42 cm
Pressure: 0 to 299 mmHg
Pulse: 40 to 180 beats/min.
Pressure: ±3 mmHg
Pulse: ±5% of display reading
1 year
EN
3