AKG Acoustics Perception 120 USB Mode D'emploi page 23

MAC OS X
Perception USB
1) Open the sound settings in the system preferences.
2) Select the Output tab.
3) Recommendation: The Sound playback device must be changed from
"Perception 120 USB" back to the original playback device.
4) Select the Input tab.
5) If the AKG Perception 120 USB is not selected automatically on the list of
sound recording devices, highlight it in the list.
6) Open the volume control in your recording software or use the slider to
select the volume required for your recordings, see Level se
24).
Configuration / Volume control
Figure 9: Sound settings in MAC OS
Figure 10: Volume control in MAC OS
Level settings
Level se Level se
ttings (Page
ttings ttings
23