Connect Dust Extractor; Connecting Electric Power Tools; Connecting The Suction Hose - Festool CT SYS HEPA Guide D'utilisation

use one long one.
 The lower the AWG number, the stronger the
cord.

Connect dust extractor

WARNING
Risk of injury from tools starting up unexpectedly

Before switching on ensure that the connected
tool is switched off.

Insert the mains power cable in the cold-device
connector [2] and in an earthed socket.

Lay the mains cable through the recess [2].
The switch [1-8] serves as an on/off switch.
Using the [1-9] switch, switch between the AUTO and
MAN settings.
"MAN" switch position
Appliance socket [1-10] is not connected to the pow-
er, the dust extractor starts.
"Auto" switch position
Appliance socket [1-10] is connected to the power,
the dust extractor starts when the connected tool is
switched on.
Pull the plug from the socket when the ma-
chine is not in use and prior to maintenance
and cleaning work.

Connecting electric power tools

WARNING
Risk of injury

Observe the maximum appliance socket con-
nected load (see chapter "Technical data")

Switch off the electric power tool.
– Always use the socket on the machine for the pur-
pose specified!

Connect the electric power tool to the appliance
socket [1-10].

Connecting the suction hose

at the extraction opening [3]

Connect the suction hose to the elbow at the ex-
traction opening.
3
11