Throttle Lever; Fittings And Fasteners - Yamaha Kodiak YFM450FAV Manuel Du Propriétaire

Table des Matières

Publicité

WARNING
_
Wait for the engine and radiator to cool before
removing the radiator cap. You could be
burned by hot fluid and steam blown out under
pressure. Always put a thick rag over the cap
when opening. Allow any remaining pressure
to escape before completely removing the cap.
_

Throttle lever

Check to see that the throttle lever operates cor-
rectly. It must open smoothly and spring back to
the idle position when released. Have a Yamaha
dealer repair as necessary for proper operation.

Fittings and fasteners

Always check the tightness of chassis fittings and
fasteners before a ride. Take the machine to a
Yamaha dealer or refer to the Service Manual for
correct tightening torque.
5-21
EBU01083
EBU01162

Publicité

Table des Matières
loading

Table des Matières