Technical Data; Plug And Socket Ghg 524 - Eaton CROUSE-HINDS GHG 525 Série Mode D'emploi

Dimensions in mm
X = fixing dimensions
Flange socket
Inlet, 5- pole
Inlet, 4- pole
Plug, 5- pole
Plug, 4- pole
Wall socket with switch
Plug and socket system 125 A, GHG 525
1

Technical data

1.1 Plug and socket GHG 525
Rated voltage
Rated current
Back-up fuse
Switching capacity
Wall socket with switch
Perm. ambient temperature:
(Other temperatures possible for special versions.)
Perm. storage temperature in original packing
Protection category acc. to IEC/EN 60529
with closed and secured hinged cover as well
as combinations properly plugged together
Insulation class acc. to IEC/EN 61140
Cable entries:
Wall socket with switch
suitable cables and test torques of the
pressure srew
Seal 1+2
1 2
3
Seal 1
1 2
3
Test torque for screw in thread cable entry
(1)
The tests of clamping ranges and torque values were performed with metal mandrel. The clamping range can
vary by using cables with different manufacturing tolerances and material properties. Please use a suitable
combination of seals in the intermediate area, so that the cap nut can be tightened in future maintenance
work on the cable entry.
Plug / Coupler
Supply terminal:
Wall socket with switch
Plug
Flange socket / Coupler
Pilot contact
Test torques:
Cover screws
Terminals
Self-cutting screws size 4
Self-cutting screws size 5
Switch connection screw
Weight: (catalogue version)
Wall socket with switch
Plug
Flange socket
Inlet
Coupler
Drilling template for inlets
up to 690 V, 50/60 Hz
125 A
125 A
AC 22
415 V / 125 A
500 V / 125 A
690 V / 125 A
-20 °C to +40 °C (standard version)
-20° C to +40° C
IP 66 (catalogue version)
I - is complied with by the devices
(catalogue version)
1 x M63 + 1 x blanking plug M63
Ø
min. 29.0
(1)
max. 35.0
min. 36.0
(1)
max. 41.0
7 .5 Nm
Ø 31 - 58 mm
Cross section
1 x 10 - 70 mm²
1 x 4 - 35 mm²
with pin cable lug 1 x 50 mm
1 x 2.50 - 35 mm²
1 x 2.50 mm²
2.5 Nm
4.5 Nm
2.0 Nm
3.0 Nm
6.0 Nm
3-pole
GHG 525 4. approx. 8.40 kg approx. 8.50 kg approx. 8.70 kg
GHG 525 7 . approx. 1.20 kg approx. 1.30 kg approx. 1.40 kg
GHG 525 8. approx. 1.30 kg approx. 1.40 kg approx. 1.50 kg
GHG 525 9. approx. 0.80 kg approx. 0.90 kg approx. 1.00 kg
GHG 525 3. approx. 1.90 kg approx. 2.00 kg approx. 2.10 kg
Drilling template for flange sockets
Coupler
GB
AC 23
415 V / 90 A
500 V / 70 A
690 V / 50 A
Nm
12.0
12.0
12.0
13.0
Stripped wire
length
18 mm
13 mm
2
16 mm
10 mm
4-pole 5-pole
7