Panasonic EH-SA31 Manuel D'utilisation page 13

If the water supply cap seal detaches
1. Use your index finger to push up on the center of the water supply
cap.
2. Press lightly along the outer rim of the water
supply cap seal ( A ) and find the raised edge
on the water supply seal ( B ).
3. Allow the water supply cap
seal to float while turning
the seal by hand and
match the raised edge on
the water supply seal ( D )
with the groove on the
water supply cap ( C ).
Specifications
Model No.: EH-SA31
Power source
Power consumption
Steam discharge rate
Steam temperature
This product is intended for household use only.
FOR YOUR CONVENIENCE, WE HAVE ESTABLISHED A TOLL-FREE (IN USA
ONLY) NATIONAL ACCESSORY PURCHASE HOT LINE AT 1-800-332-5368.
IN CANADA, CONTACT PANASONIC CANADA INC. AT THE ADDRESS OR
TELEPHONE NUMBER ON THE BACK PAGE.
120 V , 60 Hz
Approx. 6 mL/min
Approx. 40 °C (104 °F)
(at a distance of approx. 20 cm (8") from the edge of the


127 V
290 W
nozzle)


, 60 Hz
13