Functional Parts - Italtecnica Fluomac FC2 S 908 Mode D'emploi

GB
INSTRUCTIONS FOR USE

FUNCTIONAL PARTS

1. Grid voltage indicator
2. Dry stop indicator
3. RESET button
4. Cable clamps
1. FEATURES
Fluomac is designed to automatize the starting and stopping operations
of an electric pump with regard to a drop in pressure (opening of the
taps) and to the stopping of the flow through the system (closing of the
taps), respectively. Furthermore, Fluomac stops the pump when senses
the lack of water flow, preventing it from any damaging dry operation.
It is advisable using Fluomac with water systems whose water is
without sediments. In case it is not possible, it is necessary to install a
filter before the inlet of the device.
5. Outlet with 1" male
threaded connection
6. Operating pressure setting
screw
7. Inlet with 1" male threaded
connection