Getting Ready; Location; Assembly; Assembling The Unit - Yamaha TT-S303 Mode D'emploi

Getting ready

Location

Because record playback is easily affected by vibration, you should place the unit in a level location that is not subject to external vibration.
Place it sufficiently far from your speaker system so that it will not be affected by sound pressure or vibration.

Assembly

Assembling the unit

1
Lift up the platter.
2
Reaching through the round hole in the platter, pull the belt
outward, hooking it over your finger.
3
Insert the platter onto the center spindle.
CAUTION

Take care not to drop the platter. Dropping it might cause injury, or might
damage the unit.
12
En
2
1
3 3