BoomToneDJ PAR-64 Mode D'emploi page 16

A. By Master/slave Built-in Preprogrammed Function
By linking the units in master/slave connection, the first unit will control the other units to
give an automatic, sound activated, synchronized light show. This function is good when
you want an instant show. You have to set the first unit in Automatic,sound activated mode .
Its DMX input jack will have nothing plugged into it. The other units will have to select SLAV ,
Their DMX cables plugged into the DMX input jacks (daisy chain) and the slave led lights
will constantly on.
B. By universal DMX controller
Using universal DMX controller to control the units, you have to set DMX address from 1 to
512 channel so that the units can receive DMX signal.
Press the MENU button ,find Addr,press ENTER, then A001 is showing on the display.,Use
DOWN and UP button to change the DMX512 address.
DMX Value
3CH mode:
Channel
1
2
3
5CH mode:
Channel
1
2
3
Value
0-255 Red dimmer
0-255 Green dimmer
0-255 Blue dimmer
Value
0-255 Red dimmer
0-255 Green dimmer
0-255 Blue dimmer
Function
Function
15