Velda FISH FEEDER PRO Mode D'emploi page 16

Default settings
Using the 'settings' menu, you can return all the settings to
the factory default. The feeder also returns to the factory
default after being reset or if you do not enter your own
settings. If you use the factory default, one dose will be
dispensed automatically four times a day.
Basic screen
Pressing any key displays the basic screen. This contains the
most important information about the feeder. You can see
whether automatic feeding has been turned on, check the
number of feedings a day and the amount of each feeding.
Screen sleep mode
If no input is made to the operating display for 30 seconds,
the feeder enters 'sleep mode' and the screen light is turned
off. This maintains the optimal quality and lifetime of the
screen. As soon as a key is touched, the light turns on again.
Locking the keys
The operating display has a key deactivation function to pre-
vent inadvertent changes to the settings. Press the middle
(set) key for three seconds to lock the keys. The message
'keypad locked - push 'O' button 3 sec. to unlock' appears.
Pressing the middle (set) key for 3 seconds unlocks the
keypad. This function can be turned on or off at any time.
AUTOMATIC FEEDING
The Fish Feeder Pro can dispense feed automatically up to a
maximum of 20 times a day. The intervals between the feed-
ings must be at least 30 minutes. No feed will be dispensed if
the automatic feeding is turned off. Manual feeding is always
possible, whether or not the automatic feeding is turned on.
The factory default applies after a reset or if you do not enter
any settings: 1 dose of automatic feeding 4 times a day.
Number of feedings a day
You can set the number of feedings a day between 1 and 20.
The feedings are spread automatically between 8 a.m. and
8 p.m. If you opt for 7 feedings, your fish will be fed at 8 a.m.,
10 a.m., 12 noon, 2 p.m., 4 p.m., 6 p.m. and 8 p.m. If these
are the feeding times you want, select 'feeding times ok' .
If you want to change the feeding times, navigate to a
particular feeding using the arrow keys and make your
selection with the middle key (set). Then you can change
the hours using the arrow keys, and confirm the settings
with the middle key (set). After that, you can change the
Menu operating display
automatic feeding
feedings/day
amount/feeding
1 dose
extra manual feeding
settings
velda
21-06-09 23:56
automatic feeding
velda
21-06-09 23:56
feedings/day
velda
21-06-09 23:56
feeding times ok
time feeding 1
08:00
time feeding 2
12:00
velda
21-06-09 23:56
amount/feeding
1 dose
velda
21-06-09 23:56
extra manual feeding
feeding amount
1 dose
velda
21-06-09 23:56
date/time
language
default settings
velda
21-06-09 23:56
date&time ok
date
21-06-09
time
23:56
velda
21-06-09 23:56
on
4
>
>
on
4
>
>
>
>
>