Publicité
Les langues disponibles
Les langues disponibles
1074, Avenue des Carrières – Z.A la Plaine du Caire III
13830 ROQUEFORT LA BEDOULE – FRANCE
www.ermax.fr - E-Mail : accueil@ermax.fr
Fitting kit
- 2 nylon beveled spacers 6×20
- 2 nylon beveled spacers 6×25
- 2 screws BHc 6×40 small head
Fitting instructions
- Remove the original windshield.
- Place the « silent block » on the Ermax windshield: the collar of the metallic part is placed on the
outside of the windshield.
- Screw the windshield on the scooter thanks to the supplied screws by inserting the spacers between the
windshield and the scooter as shown on the picture. The spacers may have to be turned to align the
beveled side with the windshield.
* Accessories gone up on the motorbike will not be any more considered as new and will be neither retaken nor exchanged.
* Ermax accessories are foreseen for original equipments. They will not be guaranteed if they are used in others conditions.
* Due to vehicles made tolerances, beyond our control, some Ermax products might need adjustings to fit.
* The mentioned label of motorbikes's manufacturers are indicated exclusively as a reference to Ermax accessories.
* Care to excessive clampings which may damage or break our plastic accessories and aluminium screws.
* Screens damaged by an inadequat washing are not guaranteed (abrasive, corrosive ... products, solvent, thinner, benzine ...). Wash immediately brake or battery fluid which may flow on accessories.
ERMAX WINDSHIELD ADAPTABLE ON
- 4 « silent block »
- 2 screws BHc 6×50 small head
Spacers' location 6×25
and screws 6×50
Spacers' location 6×20
and screws 6×40
« CAUTION »
FITTING INSTRUCTIONS
KYMCO X-Citing 400 2017 →
Estimated mounting time : 30 mm
EN
Date : 25/09/17
∞
Publicité
