König Electronic SEC-DVR404 Mode D'emploi page 2

Hard Disk Recorder
Introduction:
This manual is a short descriptive guide for the digital hard disk recorder. For a complete explanation on how
to use the digital hard disk recorder, refer to the full English manual supplied on the CD.
The König Electronic network DVR400 series is ideal for surveillance applications, such as in shops, offices or
at home. The wide range of features includes the latest H.264 video compression technology, up to 2 TB
storage capacity (not included), remote viewing directly on smartphone* or Internet browser and event
notification by email. With a user-friendly graphic interface providing graphic icons and visual indicators to
control and configure the DVR. Supports 16:10 widescreen VGA resolution of 1440x900.
* Supports Symbian, Windows® Mobile, iPhone, Blackberry & Android
Notes:
- The default on the screen display is set to the VGA output channel. To change this in the menu, please refer
to the full English manual, Section 4.11 Main Menu Setup.
- If the on-screen display is not available, press the "0" button on the remote control or the "<<" button on the
front panel for 5 seconds. You will hear a beep sound as confirmation. This procedure can also be used to
switch manually between VGA or BNC output.
Description of SEC-DVR404 front panel:
1
No. Key/Indicator
1 CH1
2 CH2
3 CH3
4 CH4
5 QUAD
6 REC
7 REW
8 PAUSE
9 PLAY
10 FWD
11 STOP
12 LEFT
13 UP
14 DOWN
ENGLISH
2 3 4 5
6
Mark Function
Display Channel 1 in full screen
Display Channel 2 in full screen
Display Channel 3 in full screen
Display Channel 4 in full screen
For Quad display
Start manual recording
Move left / Rewind

(it also can be used for switching to the OSD control panel)
Pause / play frame by frame

 Enter into playback mode / Play button
Move right / Play forward

 Stop Playback / Stop manual recording
Enter main menu or exit menu

Move up

 Move down
2
7 9 10 12 15
8 11 14 16
18 19
17 20