Controll Of Belt Tention; Technical Specifi Cation - GOVECS GO! S 1.2 Mode D'emploi

2.18 Control of belt tention
In order to check if the belt tension is correct
one needs to grasp the belt between the
thumb and index fi nger, in the middle of its
length (between the sprockets) and turn the
EN
belt outside wards in a way that it forms a 90
degrees angle. If one is able to turn the belt
out for more than 90 degrees it means the
tension is too loose – if for less it is too tight.
2.19 Technical specifi cation
Length
Width
Height
Seat Height
Weight
Loading capacities
Under seat trunk capacity
Topcase (optional) loading capacity
24
1800mm without grabhandlle
685 mm without mirrors
1120 mm without mirrors
790 mm
~ 140 kg
max 150 kg including the passenger
max 5 kg
3 kg