GOVECS GO! S 1.2 Mode D'emploi page 13

Controllers handling
Switching between total kilometers (odo) and daily kilometres (trip)
Holding pressed mode button [mode] (6) for one second switches from total kilometers count
(odo) to the dialy kilometers one (trip) .
EN
Pressing Trip reset button results in resetting the trip meter. In case your scooter doesn't have
the button, pushing in the selection button for 3 seconds [select] (5) will give the same result.
Pressing the mode [Mode] (6) and selection [Select] (5) buttons for 3 seconds switches speed
unit from km/h to mph (miles per hour) or vice-versa.
Setting the clock
In order to set up the clock keep pressing the mode [Mode] (6) button until the minutes value
begins to pulsate.
Then set up the minutes by pushing in the selection [Select] (5) button.
After pushing in mode button [Mode] (6) again the hour value begins to pulsate and the hour
can be set. In order to confi rm the setting, the mode button [Mode] (6) should be pushed in
again.
14