Special Tools Safety Warnings - Rodia FB750W Manuel D'utilisation

GB
these instructions to operate the power
tool. Power tools are dangerous in the
hands of untrained users.
e) Maintain power tools. Check for mis-
alignment or binding of moving parts,
breakage of parts and any other
condition that may affect the power
tool's operation. If damaged, have the
power tool repaired before use. Many
accidents are caused by poorly main-
tained power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to
bind and are easier to control.
g) Use the power tool, accessories and
tool bits etc. in accordance with these
instructions, taking into account the
working conditions and the work to be
performed. Use of the power tool for
operations different from those intended
could result in a hazardous situation.
5) Battery tool use and care
a) Recharge only with the charger speci-
fied by the manufacturer. A charger
that is suitable for one type of battery
pack may create a risk of fire when
used with another battery pack.
b) Use power tools only with specifically
designated battery packs. Use of any
other battery packs may create a risk
of injury and fire.
c) When battery pack is not in use, keep
it away from other metal objects, like
paper clips, coins, keys, nails, screws
or other small metal objects, that can
make a connection from one terminal
to another. Shorting the battery termi-
nals together may cause burns or a
fire.
d) Under abusive conditions, liquid may
be ejected from the battery; avoid
contact. If contact accidentally occurs,
flush with water. If liquid contacts eyes,
additionally seek medical help. Liquid
ejected from the battery may cause ir-
FB750W
RODIA
®
ritation or burns.
6) Service
a) Have your power tool serviced by a
qualified repair person using only
identical replacement parts. This will
ensure that the safety of the power tool
is maintained.
SPECIAL TOOLS SAFETY
WARNINGS
Each time before starting operation, the
proper function of the PRCD residual cur-
rent device must be checked. Do not use
the PRCD residual current device to switch
the machine on/off. The PRCD residual
current device may not lie in water. The
operation of the machine may not be
started when the PRCD residual current
device is not operative.
When operating the machine, water must
not be able to penetrate the motor or .the
electrical components in any working posi-
tion. Even when the PRCD residual current
device actuates, there is still danger of an
electric shock.
12
Working safely with this machine
is possible only when the operat-
ing and safety information are
read completely and the instruc-
tions contained therein are strict-
ly followed. Before using for the
first time, ask for a practical
demonstration.
Before working on the machine
itself, pull the mains plug.
Wear ear protectors and safety
glasses..