Reversing Doors; Leveling The Appliance; Connecting The Appliance; Moving The Appliance - LG GBB72PZEFN Manuel Du Propriétaire

Reversing Doors

Your appliance is designed with reversible
doors, do that they may open from either the
left of right hand side to suit your kitchen
design.
NOTE
• Reversing the doors must be performed by
the qualified personnel of LG Electronics. If
not, the doors will not be covered by the
warranty.

Leveling the Appliance

To avoid vibration, the unit must be leveled.
If required, adjust the leveling screws to
compensate for the uneven floor.
The front should be slightly higher than the rear
to aid in door closing.
Leveling screws can be turned easily by tipping
the cabinet slightly.
Turn the leveling screws counterclockwise
to raise the unit, clockwise
12

Connecting the Appliance

After installing the appliance, connect the
power plug into a socket outlet.
NOTE
• After connecting the power supply cord (or
plug) to the outlet, wait 2 or 3 hours before
you put food into the appliance. If you add
food before the appliance has cooled
completely, your food may spoil.

Moving the Appliance

1
Remove all food from inside the appliance.
2
Pull the power plug out, insert and fix it into
the power plug hook at the rear or on top
of the appliance.
3
Tape parts such as shelves and the door
handle to prevent from falling off while
to lower it.
moving the appliance.
4
Move the appliance with more than two
people carefully. When transporting the
appliance over a long distance, keep the
appliance upright.
5
After installing the appliance, connect the
power plug into a socket out to switch on
the appliance.
EN