Hansgrohe Unica'E 068900 Série Instructions De Montage / Mode D'emploi / Garantie page 6

6
English
Unica'E Wallbar installation
Remove the screw covers.
Mark the positions of the screw holes.
Drill the holes using a 6 mm bit.
Do not drill into existing water
lines!
Install the anchors.
Seal the wall around the anchors
with waterproof sealant.
Failure to seal the wall can lead to
possible water damage.
Install the wallbar using the screws and washers.
Install the screw covers.
Install the soap dish (optional).