Westfalia 307 240 300 107 Instructions De Montage page 12

Ford focus ii turnier
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 7
Connecting the power supply
17. Connect the 2-pin plug to the matching counterpart of the vehicle's cable harness on the left
vehicle side (Fig. 1/1).
Vehicles without power supply
18. Connect the adapter line included in the scope of supply to the socket cable harness (Fig. 1/1)
on the left side of the vehicle, using the 2-pin grey connector, and lay it to the right side.
19. Lock the free end of the fuse holder encluded in the scope of supply (Fig. 1/9) and/or
(Fig. 2/1) into place.
20. Disconnect the connector from the trunk socket and connect it with the connecting line
included in the scope of supply. Connect the remaining connector with the trunk socket.
21. Lock the free contact part into the second compartment of the fuse holder (Fig. 2/1). Close the
secondary lock (Fig. 2/2) and fasten the fuse holder to the cable harness.
22. Insert fuse (Fig. 2/3).
Only for 13-pin trailer socket
The 3-pin connector (Fig. 1/3) allows extending the electrical kit by the functions "Constant
plus", "Charging lead" and "Charging lead earth", using a constant plus extension kit. The
constant plus extension kit is available from specialist shops under the Westfalia part no.
300 025 300 113.
Special information concerning vehicles with parking distance control (PDC)
On vehicles with PDC it is possible to deactivate the PDC for trailer operation.
23. The PDC control unit (Fig. 1/9) is located behind the right-hand covering of the luggage trunk.
24. Connect the end of the control line with the free connector of the PDC.
Note
If you have any queries concerning the deactivation of the PDC system, please contact the
nearest garage.
Checking correct operation
25. Reconnect the ground of the vehicle's battery.
26. Check the trailer function with the help of a suitable test instrument (with load resistors) or
with the help of a trailer.
27. Secure all cables using cable ties.
28. Refit any parts removed for installation.
12
307 240 391 101 – 004 – 41/09
Installation Instructions:
Electrical System for Towing Hitch
Ford Focus II Turnier

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

307 240 300 113

Table des Matières