Cleaning And Maintenance; Guarantee Terms - Bestron AKM700 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 14
operAtion - use blender
Do not use the blender and the profi mixer simultaneously, it may overload the motor.
1. Put the blender jar in the correct position on the motor unit and turn firmly into place. The blender is
fitted with a safeguard. The blender cannot be switched on if the blender jar is not fitted to the motor
unit, or is not fitted in the correct manner.
2. Dice the solid ingredients.
3. Fill the blender jar with the solid ingredients, and then add the liquid, where relevant (maximum 1 liter).
4. Fit the lid on the blender jar.
5. Fit the lid insert to the lid.
6. Put the plug into the wall socket.
7. Turn the speed dial to the required setting. The smoothness of the mixture increases with longer
blending times (maximum of 180 seconds).
8. Switch off the blender (set to '0').
9. Wait until the blender's knives have come to a complete standstill before removing the blender jar from
the motor unit.
Whilst the blender is in operation you can add additional ingredients via the filling opening in the lid.
The Pulse setting can be used to operate the blender briefly at maximum speed. The Pulse
function operates only whilst the switch is held in the Pulse position.
Prepare crushed ice by filling the blender jar with ice cubes and repeatedly turn the speed dial to
setting pulse ("P") until you obtain ice of the required consistency.
Cut meat and other solid ingredients into small pieces before adding them to the blender jar.
To prepare tomato juice cut the tomatoes into four pieces and pour into the filling opening in the
blender jar's lid whilst the blender is in operation.
If the blender does not operate at the required speed switch off the appliance ('0') and:
a. set the switch to the Pulse position, or
b. stir the ingredients with a spatula, or
c. remove some of the ingredients in the blender jar.

cleAninG And MAintenAnce

1. Remove the plug from the wall socket.
2. Press the lift button with one hand, and lift the mixerhead with your other hand until the head locks in
the raised position.
3. Remove the accessory. The accessories may be washed only in lukewarm water. After washing, rinse
the accessories to remove all soap residues, and dry them thoroughly.
4. Remove the mixing bowl. The mixing bowl may be washed only in lukewarm water. After washing,
rinse the mixing bowl to remove all soap residues, and dry thoroughly.
5. Clean the housing of the appliance with a damp cloth. After cleaning, dry the housing thoroughly.
Verify that the appliance is not connected to the power supply before you clean it.
Never use corrosive or scouring cleaning agents or sharp objects (such as knives or hard brushes)
to clean the appliance.
Do not immerse the appliance in water, or in other liquids.
Never clean the accessories using a dishwasher.

GuArAntee terMs

The importer guarantees the appliance against defects caused by manufacturing and/or material faults for
60 months from the date of purchase, subject to the following conditions.
1. No charges will be made for labour costs or materials during the warranty period. Any repairs carried
out during the warranty period do not extend the warranty period.
2. The importer automatically becomes the owner of any faulty parts that he replaces or a faulty
appliance (in the event of replacement of the appliance).
3. All claims submitted under warranty must be accompanied by the original bill of sale.
4. Claims under warranty must be submitted to the dealer where the appliance was purchased or to the
importer.
5. The warranty is issued solely to the first purchaser and cannot be transferred.
6. The warranty does not cover damage caused by:
a. Accidents, incorrect use, wear and/or neglect.
b. Faulty installation and/or use in a manner contravening the prevailing legal, technical or safety
regulations.
24
user's instructions

Publicité

Table des Matières
loading

Table des Matières