Technical Parameters - i-WATTS I-BALR60LED Traduction Des Instructions D'origine

TECHNICAL PARAMETERS:

Power
Battery type
Battery capacity
Protection class
Number of diodes
Lighting time
Luminous flux
Colour temperature
Lamp size
weight
MAINS CHARGER
Power supply voltage
Power supply frequency
Charging voltage
Max. charging current
Charging time
Protection class
Weight
CAR CHARGER
Power supply voltage
Charging voltage
Max. charging current
SERVICE DEPARTMENT
_ Damaged switches must be replaced by our after-sales service department.
_ If replacing the power cord is necessary, it should be done by the
manufacturer or his agent to avoid a hazard.
RECHARGE AT LEAST EVERY 3 MONTHS (to ensure a longer battery life)
AFTER-SALES SERVICE AND APPLICATION SERVICE
I-WATTS technical advisers and assistants are available to answer your questions
about our products and accessories:
STORAGE
_ Thoroughly clean the whole machine and its accessories.
_ Store it out of the reach of children, in a stable and secure position, in a cool and
dry place, avoid too high and too low temperatures.
_ Protect it from exposure to direct sunlight. Keep it in the dark, if possible.
_ Don't keep it in plastic bags to avoid humidity build-up.
GUARANTEE
Refer to the enclosed guarantee conditions for the terms and conditions of
guarantee.
3.6W
Li-Ion
1200 mAh
III
60
3-4 h
130 lm
6000K
60x420 mm
0,2 kg
100-240V AC
50/60 Hz
5 V DC
500 mA
4-5 h
III
0,03 kg
12-24V DC
5 V DC
500 mA
sav@eco-repa.com
9