Bridles - Gong FREEWAVE 12,9 Guide De L'utilisateur

BRIDLES

Your Kite has been delivered with a full set
of Bridles, installed and in the Standard
Position. If you need to change your
Bridles or Re-Install them, refer to the
Diagram below for correct positioning. As
you become more familiar with your Kite,
you will be able to adjust the Bridles so
you can optimize its potential in function
with your needs.
BACKLINE SETUP
POSITION 1 :
Light Bar pressure
•
• Very reactive Kite
• Tight turns
FRONTLINE SETUP
By default, the Front
connected by an Larks Head Knot in
Position B.
You may modify this so you can adjust
the residual power of your Kite in function
to your preferences.
Attention : The adjustments made MUST
be the same, right & left, of the Kite.
IMPERATIVE :
With each use, verify the connection points and be sure there are no tangles.
Frontline bridle
setup
3
2
POSITION 3 :
1
•
• Extremely precise Piloting
Bridles are
- 15
EN
C
B
A
3
2
1
Backline bridle setup
By default,
connected by a Larks Head Knot in
Position 1.
You may change this adjustment for
managing the pressure on the Bar and
the Kites reaction in function with your
preferences.
Attention : The adjustments made MUST
be the same, right & left, of the Kite.
Heavy Bar pressure
POSITION C :
More Depower
•
C
GONGKITE.COM
the Back Bridles are
POSITION A :
More
•
Residual
B
Power
A
Ear