PIXO C1.1 Mode D'emploi page 16

Caution! Move contacts very carefully! Use only a
pen to move the contacts! Do not use your fingers
to move the contacts! Violence can damage the con-
tacts! Damaged contacts are out of guarantee!
3. Now you can definitely fix the battery pack on top of
the battery charger contacts. The battery pack does
not have to lie on the floor plate of the charger. A
floating position is sufficient.
The steps 1 to 3 must be repeated for every battery
type. The green LED will be on or flashes if the battery
is contacted correctly. If the green LED is off, the bat-
tery pack is not contacted correctly. Please check the
contacts once more. If the the contact is ok you have in-
serted the wrong battery type or a faulty battery pack.
The green LED indicates the charge process. LED
functions are explained in the list below. The Battery
Activator Function for deep discharged Li-Ion batteries
works with delay and starts the charge process after a
longer test stage.
Caution!
Do not charge 9 V NiMH / NiCd battery packs!