PIXO C1.1 Mode D'emploi page 14

Generic technical specifications
• LEDs for visual indication of Li-Ion, NiMH or NiCd
charge process
• Compact and light base unit with 125 x 65 x 27 mm
and 85 grams
• Worldwide home use via the ultra light and compact
100-240 V switch mode power supply with 12 VDC
700 mA
• Mobile use via 12V car cigarette lighter plug
Scope of supply (what is in the box)
Base Unit, Power Supply, Car Cigarette Lighter Plug,
Users Manual
Charging process
Please connect the power supply or the car cigaret-
te lighter plug to the charger. The charger is ready to
use when the red Power LED is on. You can charge 1-2
NiMH / NiCd batteries or one Li-Ion battery pack.
Caution! You can not charge NiMH / NiCd batteries and
Li-Ion battery packs at the same time!
NiMH / NiCd charge process
The batteries are fixed and contact is made with the
snap-in support. Take care to have the right polarity.
The charge process starts automatically after battery
insertation. The green LED indicates the charge pro-
cess. LED functions are explained in the list below.