Philips AZ1037/37 Mode D'emploi page 11

CD/MP3 Player
Programming track
numbers
You may store up to 20 tracks (for MP3: 10
tracks) in the desired sequence. If you like,
store any track more than once.
For Audio CD:
1 In the stop position, press PROG to
activate programming.
➜ Display: PROGRAM and P01 flash,
indicating the start of the program. (See 8)
2 Press § or ∞ to select your desired track
number.
➜ Display: PROGRAM and your desired
track number flash.
3 Press PROG to store the desired track
number.
➜ Display: PROGRAM and P02 flash,
indicating the next program location
available.
4 Repeat steps 2 to 3 to select and store all
desired tracks in this way.
➜ ''PROGRAM" and --- flash after 20
tracks are stored.
5 To play your programme, press 2;.
For MP3:
1 In the stop position, press PROG to
activate programming.
➜ Display: PROGRAM and P01 flash,
indicating the start of the program.
2 If necessary, press ALBUM+ to select
another album.
➜ Display: ALBUM and selected album
number (See 9)
3 Press § or ∞ to select your desired track
number.
➜ Display: the selected track number in
current album.
4 Press PROG to store the desired track
number.
➜ Display: PROGRAM and P02 flash,
indicating the next program location
available.
5 Repeat steps 2 to 4 to select and store all
desired tracks in this way.
➜ ''PROGRAM" and --- flash after 10
tracks are stored.
6 To play your programme, press 2;.
Helpful hints:
– When playback of PROGRAM or
SHUFFLE is active, use of the ALBUM+
keys are void.
Reviewing the program
In the stop position, press and hold
PROGRAM to see your store track
numbers.
➜ The stored track numbers are displayed
in the sequence.
MP3 only: ALBUM and an album number
appear, then a stored track number in the
album is displayed.
Helpful hints:
– Display shows flashing P01 if no track is
programmed.
Erasing the program
You can erase the contents of the memory
by:
– pressing STOP 9 (twice during playback
or once in the stop position);
– selecting TUNER or TAPE sound
source;
– opening the disc door.
➜ Display: PROGRAM disappears.