Oceanic OCEAISH1750W0 Guide D'utilisation page 42

Press OK-boost button to choose Program mode
Under Fil-pilote mode, choose the mode via the external control (for France only). For other
countries except France, if you choose mode Fil pilote P, the appliance will work at comfort mode
as default.
If the working interface is at Program mode, press and hold MENU button for 3 seconds, the
appliance will shift from Program mode to Fil pilote mode.
When the external controller is programmed, the display shows:
External Mode Setting
Comfort mode
Comfort mode -1
Comfort mode -2
Economic mode
Antifreeze mode
Standby mode
II. Boost Mode
Under all other working modes except Fil pilot mode, press and hold OK-boost button for 3
seconds to activate or inactivate the boost mode. Under boost mode, the temperature is
automatically set at 29℃ and cannot be adjusted. Press +/- to choose from bSt1 / bSt2 / bSt1
+ / bSt2 + . Short press OK-boost to confirm and activate boost mode, or you can short
press MENU to exit or after 30 seconds it will automatically exit and go back to previous working
interface.
bSt1: the towel rack work at boost mode for one hour, then returns to previous mode.
bSt2: the towel rack work at boost mode for two hours, then returns to previous mode.
bSt1 + : both towel rack and blower work for one hour, then return to previous mode.
bSt2 + : both towel rack and blower work for two hours, then return to previous mode.
To exit boost mode, press MENU button or hold OK-boost for 3 seconds.
Icon Displayed
Page 41 of 48
or Fil pilote mode .