Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION
RECOMMENDATIONS IMPORTANT READ
BEFORE INSTALLATION
- Do not install the unit directly below a socket.
- Do not use the appliance outdoors.
- Do not install the unit in an air current that could
disrupt its regulation.
- Do not place the unit near a barrier limiting the
airflow around it.
- Attach the heater vertically to the wall as described
below.
- Choose screws and plugs suitable for the wall
material and weight of the unit.
RECOMMENDATIONS FOR WALL MOUNTING
Do not make any changes to the unit or its mounting
bracket on the wall!
Before installing the device, check the condition of
the wall on which it will be fixed: the wall must be in
good condition, it must not show any damage
(cracks, sagging, humidity, ...).
Do not drill holes near old holes, even when they are
closed.
It is imperative that you consult a building
professional to use the anchoring system (screws,
dowels, etc.) appropriate for the material that
constitutes your wall, as well as the weight of the
appliance. Observe the diameter of the fixing screws
indicated in this manual.
Page 29 of 48
Publicité
Table des Matières
