SEVERIN TO-2038 Mode D'emploi page 11

- after use, as well as
- in cases of malfunction, and
- during cleaning.
∙ When removing the plug from the wall
socket, never pull on the power cord;
always grip the plug itself.
∙ No responsibility is accepted if damage
results from improper use, or if these
instructions are not complied with.
∙ This appliance is intended for domestic or
similar applications, such as
- in shops, offi ces and other similar
working environments,
- in agricultural working environments,
- by customers in hotels, motels etc. and
similar establishments,
- in bed-and breakfast type environments.
Before using for the fi rst time
∙ Clean the appliance (see Cleaning and
care) and completely remove any packing
materials.
∙ Before using the appliance for the fi rst
time, let it heat up for 15 minutes with
both heating elements (
Operation). When the appliance is
switched on for the fi rst time, a slight
smell may be emitted. This is normal and
will only last for a very short time. Ensure
suffi cient ventilation.
4-position switch
Off
Upper heat
Lower heat
Upper and lower heat
Turn the 4-position switch to the desired
setting.
The heating elements will only switch on
after the timer is activated.
Timer
The timer can be used for selecting a certain
cooking time (max 60 minutes).
To turn the unit off, turn the switch to position
0.
To pre-programme the cooking time, turn the
switch clockwise to the desired time.
To set a time of less than 10 minutes, turn
the timer to a somewhat higher setting fi rst
and then slowly turn it back to the desired
time setting. After the pre-programmed time
has elapsed, an acoustic signal indicates
that the heating elements are switched off.
Indicator lamp
The indicator lamp lights up when the
appliance is switched on with the timer. It
goes out once the pre-programmed time has
elapsed, or if the switch is turned back to
position 0.
Interior compartment temperature
The interior operating temperature is around
200 °C.
) on (see
Operation
∙ Pre-heat the oven compartment for
∙ Place the food to be cooked onto the
∙ Close the glass door and use the timer to
∙ After the pre-programmed cooking time
∙ To interrupt the cooking process, set the
several minutes with the door closed,
using the 4-position switch to set the
required temperature, and the timer to set
the desired pre-heating time.
rack. When cooking food containing fat
or moisture, use the tray to stop any drips
into the interior of the appliance.
choose the desired cooking time.
has elapsed, the timer will automatically
switch off the heating elements.
11