Preventive And Corrective Maintenance; Cleaning The Stapler; Removing Jammed Staples - Kuda a.560M Mode D'emploi

KUDA PACKAGING
6
Fig. 8
Fig. 9
SERVIS A NAHRADNÍ DÍLY
06.14
www.kuda-packaging.com

PREVENTIVE AND CORRECTIVE MAINTENANCE

+420 607 237 237
info@kuda-packaging.com

6.1 CLEANING THE STAPLER

This stapler does not require special servicing. It only
needs regular cleaning with a non-aggressive (non-
corrosive) cleaner agent. Do not remove any parts for
cleaning purposes!
Check the proper functioning of all safety devices
daily. Make especially sure that:
– all screws and nuts are securely
tightened.

6.2 REMOVING JAMMED STAPLES

To remove a staple which has become jammed:
– Unscrew the six screws at the rear body (Fig 8).
– Remove rear body and the defective staple
(Fig 9).
– Assemble in the opposit way.
servis@josef-kihlberg.eu
Josef Kihlberg a.560M
9