Ecler eHMA Série Notice D'utilisation page 30

7. TECHNICAL CHARACTERISTICS
7. CARACTÉRISTIQUES TECHNIQUES
eHMA240
POWER (100V OUTPUT)
POWER (LOW Z OUTPUT)
Frequency response (HPF at 70Hz)
THD+Noise @ 1kHz Full Power, SPEAKER OUTPUT, LINE
Channel Crosstalk @ 1KHz
Input Sensitivity / Nominal impedance
CMRR
High Pass Filter
Tone control
Signal Noise Ratio (Gain at center, low Z output)
Talkover (Inputs 1, 2, 3 & 4)
Phantom voltage
MUTE INPUT
Mains Voltage
Power consumption (pink noise, 1/8 power)
Power consumption (pink noise, 1/3 power)
Power consumption in Standby mode (time 2 minutes)
Efficiency (typical)
Dimensions WxDxH (knobs excluded)
Weight
30
7. CARACTERÍSTICAS TÉCNICAS
7. TECHNISCHE DATEN
INPUT 3 LINE
INPUT 4 LINE
INPUT 5 LINE
INPUT 6 LINE
INPUT 1 MIC
INPUT 2 MIC
INPUT 3 MIC
INPUT 4 MIC
MICRO (BAL)
BASS
TREBLE
LINE
MIC (BAL)
TIME
DEPTH
See characteristics in the back of the unit.
250W @ 41.6Ω 1% THD
245W @ 4Ω 1% THD
70Hz - 25kHz (-3dB)
<0.2%
>65dB
-15dBV to +15dBV / >10kΩ
-15dBV to +15dBV / >10kΩ
-15dBV to +15dBV / >10kΩ
-15dBV to +15dBV / >10kΩ
-20 to -50dBV / >1kΩ
-20 to -50dBV / >1kΩ
-20 to -50dBV / >1kΩ
-20 to -50dBV / >1kΩ
>65dB @ 1kHz
70Hz
100Hz ±15dB
10KHz ±15dB
>85dB
>75dB
2 Sec.
-30dB
+18VDC
By dry contact (normally open)
49W
105W
9W
86%
435x200x88mm
5.8 kg