Electrical Connection - Franke VITAL CT2.5L Manuel D'installation Et Mode D'emploi

EN

ELECTRICAL CONNECTION

This product can be supplied with
detachable power cord or with a no
detachable power cord.
If the detachable power cord is
damaged, it must be replaced with a
cable available from the manufacturer or
its technical assistance service If the
not detachable power cord is damaged,
it must be replaced by the manufacturer,
its service agent or similarly qualified
persons in order to avoid hazard.
Make sure that the power supply
Z X
to the appliance is the same as the
voltage indicated on the label on the
side of the appliance. The appliance
must be grounded in compliance
with applicable standards and
laws.
In case of malfunctioning, grounding
Z X
reduces the risk of electrical shocks.
Connect the appliance cable to a
double-pole switch with a minimum
of at least 3 mm distance between
the contacts, or using a plug which
must still be accessible after
installation.
04
Franke Chiller CT2.5L
No. Meaning
1 Inlet water
Outlet Cold Water
2
Thermostat
3
Condensing Unit
4
Main Power Unit
5
Cooling/ Compressor Unit
6
– 8 –
02
01
03