System Requirements; Hardware Description; Jumper Settings - König Electronic CMP-SATAPCI30 Mode D'emploi

Features
• Silicon Image SiI3512 SATA controller chip
• Compliant with PCI specification, Revision 2.3
• Compliant with serial ATA 1.0 specification
• Provides two independent channels to support up to two serial ATA drives
• Supports SATA up to 150MB/sec
• S-ATA hot plug/unplug hardware support
• Supports 48-bit LBA (Logic Blok Addressing) for hard drives larger than 137GB
®
• Supports Windows 2000, XP/2003 32/64 bit, Vista 32/64 bit
Connectors
• 2x internal S-ATA connectors
• 2x external eS-ATA connectors

System Requirements

• Pentium-class computer with one available PCI slot
®
• Windows 2000, XP/2003 32/64 bit, Vista 32/64 bit
Package Contents
• 1x S-ATA 150 PCI card 2-channel
• 1x Driver CD
• 1x User Manual
• S-ATA data cable

Hardware Description

Note: There are four S-ATA ports on the S-ATA 150 PCI card 2-channel.
We name these ports from A to D. Ports A & B are internal S-ATA ports.
Ports C & D are external S-ATA ports. Changing the jumper setting enables you to select which ports are active. By
default, Port A and B are working.

Jumper Settings:

JP description active port
J1-J4 1-2 close enable SATA port C
2-3 close enable SATA port A
J5-J8 1-2 close enable SATA port D
2-3 close enable SATA port B
ENGLISH
2