Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Getting started
Charging procedure
The HERO is equipped with an inbuilt accumulator battery. Before
using the headphone for the first time, we recommend you to fully
charge the device. Please use the supplied USB cable and plug the
USB A plug into a free USB port (DC5V
plug into the micro USB port of the headphone.
The indicator LED will light red during the charging process and will
turn blue when the unit is fully charged. One full charging process
takes about 1-2 hours.
As soon as the headphone starts running out of power, you will
hear the voice prompt "battery low" through the speakers.
Power on
Press the MFB button until the blue indicator LED turns on and you
hear the voice prompt "power on".
Power off
Press the MFB button until the red indicator LED turns on and then
off again. You will hear the voice prompt "power off".
Ear hooks
The Hero is equipped with flexible ear hooks to accommodate
most ears. Adjusting the direction will secure your earbuds and
liberate your actions.
16
1A) and the micro USB
Volume Key -
Multi-functional button (MFB)
Volume Key +
Microphone
Micro USB port
LED indicator
17
Publicité
Table des Matières
