Table des Matières
Publicité
7
L
To properly balance the arm with monitors mounted, adjust the spring tension using the
supplied Allen Key as follows:
First, position and fi r mly hold the arm horizontally
as shown. Ask for assistance should you require it.
CAUTION: To avoid damage to monitors or
mount, always keep the arm in a horizontal
position while making adjustments.
Again, ask for assistance if required.
8
MONITOR MOUNT | GSA6131B
If the arm drops, turn the adjustment
screw counter-clockwis e until it stays
in a horizontal position.
If the arm rises, turn the adjustment
screw clockwis e until it stays in a
horizontal position.
CAUTION:
DO NOT over tighten the screws.
9
L
Note: If the display does not stop at
your desired position, tighten the
screws as s hown.
7
Publicité
Table des Matières
