Guarantee And Service - Philips FC8768 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 49
English
12
Environment
-
Do not throw away the appliance with the normal household waste at the end of its life, but
hand it in at an oficial collection point for recycling. By doing this, you help to preserve the
environment (Fig. 43).
-
To save energy, switch off the appliance when you stop vacuum cleaning, even if it is only for a
short while.

guarantee and service

If you need service or information or if you have a problem, please visit the Philips website at
www.philips.com or contact the Philips Consumer Care Centre in your country. You ind its phone
number in the worldwide guarantee lealet. If there is no Consumer Care Centre in your country, go
to your local Philips dealer.
troubleshooting
This chapter summarises the most common problems you could encounter with the appliance. If
you are unable to solve the problem with the information below, contact the Consumer Care
Centre in your country.
The suction power is insuficient
1
-
Perhaps the dust bucket is full.
If necessary, empty the dust bucket.
-
Perhaps the suction power knob is not at right setting.
-
Perhaps the dust bucket lid is not placed correctly.
Place the lid correctly.
Perhaps the ilters need to be cleaned or replaced.
-
If necessary, clean or replace the ilters.
-
Perhaps the nozzle, tube or hose is blocked up.
To remove the obstruction, disconnect the blocked-up part (hose or tube) and connect it (as
-
well as possible) the other way round. Switch on the vacuum cleaner to force the air through
the blocked-up part in opposite direction (Fig. 44).
It is dificult to move the nozzle over the loor.
2
By reducing suction power, you can move the nozzle across the loor more easily
-

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Fc8760Powerpro fc8766/01Powerpro fc8764/11Fc8764Fc8767

Table des Matières