Panel Descriptions - König Electronic KN-HDMICON40 Mode D'emploi

Package contents:
Before attempting to use this unit, please check the packaging and make sure the following items are
contained in the shipping carton:
• Main unit.
• 5V DC power supply.
• User's manual.

Panel descriptions:

1) Scart input connection
2) HDMI output connection
3) 5V DC connection
Connection and operation:
Before installation, please make sure all devices you wish to connect have been turned off.
• Connect the source device and the converter using a SCART cable.
• Connect the Converter and the destination device using an HDMI cable.
• Insert the DC side of 5v power supply into the converter and then connect the AC side of the power
supply into the wall outlet.
• Turn on the Power
Attention: Insert / Extract cable gently.
Connection diagram:
STB
DVD
Safety precautions:
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
from mains and other equipment if a problem should occur. Do not expose the product to water or
moisture.
Maintenance:
Clean only with a dry cloth. Do not use cleaning solvents or abrasives.
Warranty:
No guarantee or liability can be accepted for any changes and modifications of the product or damage
caused due to incorrect use of this product.
1
Scart Cable
Scart to HDMI Converter
To reduce risk of electric shock, this product should ONLY be opened by
an authorized technician when service is required. Disconnect the product
3
HDMI Cable
HD TV
2
3