Update Software; Check Software Version; Update Software Via Usb - Philips Fidelio SkyQuake B8 Mode D'emploi

» When the factory settings
restore is complete, the product
automatically switches off and
restarts.
5 Update
software
To get the best features and support,
update your product with the latest
software.

Check software version

In HDMI ARC mode (press HDMI
ARC), on the remote control, within six
seconds, press
once, and then hold down BASS -.
» The software version number is
displayed on the display panel.

Update software via USB

Caution
•
Do not turn off the power or remove the
USB flash drive when the software update
is in progress because you might damage
this product.
1
Check the latest software version on
www.philips.com/support.
•
Search for your model and click
on "Software and drivers".
2
Download the software into a USB
flash drive.
a Unzip the downloaded file, and
make sure that the unzipped
folder is named "UPG".
b Put the "UPG" folder in the root
directory.
3
Connect the USB flash drive to the
USB connector on this product.
twice then TREBLE -
EN 17