Initial Use; Usage - Beurer BARBERS CORNER HR 5000 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 30

7. Initial use

You can operate the device using the battery or the mains adapter supplied.
Battery operation
In order to be able to operate the device with the battery, fully charge the battery for 60 minutes
prior to initial use. The operating period of the device is approx. 60 minutes when it is fully charged.
To charge the battery, proceed as follows:
1. Ensure that the device is switched off.
2. Connect the mains adapter to a suitable socket.
3. Plug the other end of the mains adapter into the connection socket on the un-
derside of the device. The charging indicator now begins to flash. The battery
indicator shows you the current battery state in percent.
4. Once the charging process is complete, pull the mains adapter out of the socket
and the device. The device is now ready for use.
Quick charging
If you have forgotten to charge the hair clippers before use, the quick-charge function helps.
Connect the device to the power supply for this purpose. The device will be ready for a complete
shave using battery operation within 5 minutes.
Mains operation
To operate the device with the supplied mains adapter, proceed as follows:
1. Connect the mains adapter to a suitable socket.
2. Plug the other end of the mains adapter into the connection socket on the underside of the
device. The battery indicator shows you the current battery state in percent and the charging
indicator begins to flash. The mains adapter delivers enough power to charge the battery and
operate the device at the same time.
3. After use, pull the mains adapter out of the socket and the device.
WARNING
Never use the device in the shower when it is being operated via the mains.
The hand-held part of the device must be disconnected from the connection cable before use in
a damp environment.

8. Usage

Travel lock
The device has a travel lock. If the travel lock is activated, it is not possible to switch on the de-
vice. The travel lock prevents the device from switching on by accident (e.g. when transporting
it in a suitcase).
24

Publicité

Table des Matières
loading

Table des Matières