Projection; Care And Maintenance; Specifications - Magnasonic MM176 K Guide De L'utilisateur

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

OPERATING INSTRUCTIONS

PROJECTION

1.
Focus setting: Adjust the projection clock brightness/focus by turning the brightness/focus
adjustment wheel (10) until the projected time is clearly shown on the ceiling or wall.
2.
To flip projected image by 180° , press 180° flip button (11).
NOTE: PROJECTS TIME IMAGE ON THE CEILING OR WALL OF A DARKENED ROOM.
MAXIMUN PROJECTION DSTANCE IS 3-9 FEET.

CARE AND MAINTENANCE

Precautions
1.
Always turn off the unit after use.
2.
Keep the unit away from magnetic objects, water or heat sources.
3.
Use a clean soft cloth moistened with lukewarm water to clean the cabinet. Never use
chemical cleaners that could damage the finish of the unit.
4.
Disconnect the unit from any power sources before cleaning.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is
connected.
Contact 1-800-663-5954 for any technical support or servicing.

SPECIFICATIONS

Frequency Range:
Power Supply:
Battery Backup:
Indoor Temperature Range:
Specifications are subject to change without notice.
AM 530 - 1710 kHz
FM 88 - 108 MHz
AC 120V ~ 60Hz, 5W
DC 3V CR2032 (Battery included)
0 to +50° C or 32 to 122 ° F
- 6 –
225A-M002

Publicité

Chapitres

Table des Matières
loading

Table des Matières