Operating Instructions; Power Connection; Setting The Time Zone; Setting Daylight Savings Time - Magnasonic MM176 K Guide De L'utilisateur

OPERATING INSTRUCTIONS

POWER CONNECTION

1. Plug the AC power cord to a household outlet AC source.
2. Clock display will flash "3" indefinitely.
3. Unit will go to Zone 3, which is the default setting, and correct time will be displayed.
SETTING THE TIME ZONE (FACTORY PRESET TO ZONE "3" – EST)
Press the >> / YEAR / DST Button (18) or << / MONTH - DAY Button (17) to select time zone 1-6.
Press the mode button (19) to confirm when the correct time zone appears on the display,
Zone 1 Newfoundland
Zone 2 Atlantic time
Zone 3 Eastern time
Zone 4 Central time
Zone 5 Mountain time
Zone 6 Pacific time
Reset the time zone:
Press SNOOZE/SLEEP/TIME ZONE button (3) and hold for 3 seconds to change the time zone
when you are in different location.
SETTING DST – Daylight Savings Time
Press >> / YEAR / DST button (18) and hold for 3 seconds to toggle on and off the DST function.
SETTING TIME AND CALENDAR MANUALLY
Press mode set button (19) in normal mode and keep depress over 2 seconds to enter time set
mode, after enter the setting mode, press mode set button (19) to change the mode cycle as
follows :
Normal → → → → Year → → → → Month → → → → Day → → → → 12/24 H → → → → RTC Hour → → → → RTC Min → → → → Normal
Action (during manual adjustment):
Press << / MONTH-DAY / ° C/°F BUTTON (17) to adjust data backward.
-
- Press >> / YEAR / DST BUTTON (18) to adjust data forward.
- Keep depress << or >> button for 2 seconds to enable auto forward.
Setting Alarm 1 and Alarm 2
Press Alarm set button (16) during normal mode and keep depress over 2 seconds to enter
alarm set mode, after enter the setting mode, press Alarm set button (16) to change the mode
cycle as follows :
Normal → AL 1 Hour → AL 1 Min → AL 1 weekend Alarm → AL 2 Hour → AL 2 Min → AL 2
weekend alarm → Normal
Select alarm weekday mode as follows
1-5 : Monday to Friday
1-7 : Whole week
6-7 : Saturday & Sunday
One day of week
- 4 –