Thorough Cleaning; Topping Up The Oil - GF CEMBRE BHP15-18- Notice D'utilisation Et D'entretien

5. MAINTENANCE
The pump is robust, completely sealed, and requires very little daily maintenance. Compliance
with the following points, should help to maintain its optimum performance:

5.1) Thorough cleaning

Dust, sand and dirt are a danger for any hydraulic device.
Every day, after use, the pump and accessoires must be wiped with a clean cloth taking care
to remove any residue. Do not use Hydrocarbons to clean the rubber parts.
5.2) Canvas bag
To protect the pump from accidental damage and dust, it should be stored with its accessories
in the special canvas bag provided and sealed well.
Canvas bag type B04P-GF: Size 620x300x320 mm (24.4x11.8x12.6 inches), weight 2,4 kg (5.3 lbs).
5.3) Storage
Once the job has been completed ensure that the ram of the connected hydraulic tool is com-
pletely retracted before disconnecting the tool.
Remove the battery from the pump.
Disconnect the flexible hose; avoid it becoming folded with narrow bends or knots that may
compromise its integrity.
Store the pump and accessories in the canvas bag in a dry place.

5.4) Topping up the oil

Periodically check, at least every 6 months, the oil level in the pump and top up if necessary:
Remove the battery from the pump.
Position the pump on its base on a flat surface.
Completely discharge the oil pressure by pushing the pressure release button (8).
Unscrew the filler cap (11).
By using a funnel, top up very slowly to completely fill the oil reservoir to the maximum level.
When the operation is finished replace the cap (11).
Always use clean recommended oil, see § 1.
Do not use old or recycled oil. Do not use hydraulic brake fluid.
Ensure that used oil is disposed of in accordance with current legislation.
6. RETURN TO Cembre FOR OVERHAUL
In the case of a breakdown contact our Area Agent who will advise you on the problem and
give you the necessary instructions on how to dispatch the tool to our nearest service Centre;
if possible, attach a copy of the Test Certificate supplied by Cembre together with the tool
or fill in and attach the form available in the "ASSISTANCE" section of the Cembre website.
29
(Ref. to Fig. 7)