Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
2. DESCRIPTION OF THE COMPONENTS
The part reference includes the following (See Fig. 1):
— (BC) Battery charger: for recharging the battery supplied; has "AIR COOLED" charging techno-
logy and a processor for managing charging cycles.
P
= 155 bar
n
To use, carefully follow the instructions in the battery charger user manual.
1
P =
0 bar
*
— (RB) Rechargeable battery: 18 V - 4.0 Ah high capacity Lithium Ion battery.
Provides 100% of its energy between -15 and +50 °C.
P
= 2248 psi
n
Electronic control of the individual cells to prevent over-charging and under-discharging.
2
*
P =
0 psi
Greater longevity and ventilated recharging in short times
thanks to AIR COOLED technology.
Timed automatic power off to optimise energy consumption.
3
Equipped with LED indicators that indicate the remaining
*
BATTERY
battery life at any time by pressing the button (P):
4 LEDs illuminated: fully charged
2 LEDs illuminated: 50 % capacity
10
4
1 LED flashing: minimum charge, replace the battery.
*
29990
With the battery inserted in the pump, the remaining bat-
tery life can also be checked on the display (3) via touch
button selection (4) (Ref. to § 4).
BHP1518
5
*
NR 17CW185
The display alongside indicates that the battery is low and the pump
will not start (Ref. to § 4.4).
LED
The approximate time to fully recharge a battery is about 80 minutes.
60°
6
ON
*
max 90°
To replace the battery, press the release button (10) (Ref. to Fig. 3) and push the
battery downward to unlock it.
Insert a charged battery from the bottom by sliding it into the guides until it locks.
RESET
7
SW:S1K16500
— (CB) Canvas bag: made from sturdy fabric, allows users to store the pump and accessories.
1
*
— (SS) Shoulder Strap: allows users to easily transport and comfortably carry the pump during
all work phases; to be connected to the rings (2).
2
*
— (PU) Portable hydraulic pump: motor-driven at 18V DC current, battery powered for autono-
mous use. Provided with a pressure transmitter that ensures precision and repeatability
of the work cycles and a maximum pressure valve to ensure maximum operator safety.
3
*
The memory card integrated into the pump allows the storage of the data relating to up to
200,000 previous operating cycles.
4
*
21
P = 0 bar
P
= 105 bar
p
P
= 155 bar
n
P =
0 bar
P
= 2248 psi
n
P =
0 psi
BATTERY
10
29990
BATTERY
BATTERY
30001
RESET
SW:S1J41405
90°
max 90°
P
max.
BATTERY
P = 0 bar
ERROR
001
002
003
004
min.
BATTERY
BATTERY
BATTERY
30001
RESET
SW:S1J41405
90°
max 90°
max.
BATTERY
B
m
BATT
Publicité
Table des Matières
