Safety Rules; Warning; General Instructions - Altrad PR0 900 Manuel De L'opérateur

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

WARNING! BEFORE YOU ATTEMPT TO OPERATE THE MACHINE , PLEASE
• Machine must be operated by the reliable operators who read and understand the operation manual of
age above 18.
• Keep your work area clean and well lit. Cluttered benches and dark areas may cause accidents.
• Know your work area! It is necessary to know possible obstacles, inclinations and underground utility
lines.
• Before starting the work, inspect the machine thoroughly; check all safety devices, indicators and
controls.
• Do not operate power tools in explosive atmosphere, such as in the presence of flammable liquid, gases
or dust.
• Never unattended the machine while the engine is running
• Keep children and visitors away while operating a power tool.
• Never run the engine in closed areas, unless proper ventilation is ensured.
• Concentrated exhaust fumes are dangerous to health.
• For the proper use of this equipment, please assure that the operator has been correctly informed of the
content of this manual before using it.
Stay alert, watch what you are doing and use common sense when operating a power tool.
Do not use equipment, when you are tired or under the influence of drugs, alcohol, or medication.
Dress properly.
Do not wear loose clothing or jewelry. Loose clothes, jewelry, or long hair can be caught in moving
parts.
Keep proper footing and balance at all times.
Check all adjustments of the machine.
Keep your hair, clothing and gloves away from moving parts.
Use safety equipment and check all safety devices before start the engine.
Hold the machine firmly.
Extra care should be paid when operating the machine at the edges of digs, holes, etc. To avoid rolling
over or falling down of the machine.
The operation of the machine may require walking backwards, so be aware of the obstacles. Stepping
in or tripping over such obstacles will cause the operator to lose control of the machine and can result
in injury.
Be sure that stop switch on your machine, is working properly. Ignition supply must be cut off at once
in case of emergency.
When you are going to leave the machine after termination or interruption of the work, secure the
machine from unauthorized use or accidental move.
READ CAREFULLY AND UNDERSTAND THIS OPERATION MANUAL !!!

General Instructions

Safety instructions while operating the machine

1 . SAFETY RULES

13
GB

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Optlw951Pro 1200Optc12006

Table des Matières