English - i-tec PCI-E 2x M.2 Mode D'emploi

PCI-E 2x M.2 Card
INTRODUCTION
Internal PCI-E card for your desktop computer. Add fast SSD disk format M.2
to your system. The card has one slot for M.2 SATA discs and one slot for M.2
PCI-E discs.
SPECIFICATION
• Allows simultaneous connection of M.2 SSD, 1x B key and 1x M key NGFF
SSD via PCI-E 4X interface
• Complies with PCI Express M.2 Specification 1.0.
• Complies with SATA 3.0 specification for the B key
• Complies with PCI­E 4X 3.0 specification for M key
• Support for data transfer speeds of up to 6 Gbps
• Support for SATA-based B key and PCI-E 4X-based M key NGFF SSD
• Support for sizes 2230, 2242, 2260, 2280 NGFF SSD
• Support for booting
• Support for Windows 7 32/64bit, Windows 8 32/64bit, Windows 8.1
32/64bit, Windows 10 32/64bit, Linux
CONNECTORS
• 1x connector for SATA-based B key NGFF SSD
• 1x SATA connector to the motherboard
• 1x connector for PCI-E 4X-based M key NGFF SSD
PACKAGE CONTENTS
• i-tec PCI-E 2x M.2 Card
• Low profile backplate
• SATA cable
• Mount kit
• Manual
SYSTEM REQUIREMENTS
• Pentium compatible PC with a free PCIe 4X slot
• OS Windows 7 32/64bit, Windows 8 32/64bit, Windows 8.1 32/64bit,
Windows 10 32/64bit, Linux
DESCRIPTION OF THE DEVICE
PCIe card enabling connection to M.2 SSD. SATA-based B key and PCI-E
4X-based M key NGFF SSD, both individually and simultaneously.
HARDWARE INSTALLATION
1. Turn off your PC and connected devices.
2. Disconnect power from the PC.
3. Remove the cover of the PC.
4. Remove the cover of the free PCIe slot.
4 |

ENGLISH