Maintenance; Warranty - Haussmann 18v Ni-Cd 59595059 Guide D'utilisation

MAINTENANCE

Replacing the light bulb
To change the light bulb, hold the top of the light with one
hand and clamp the black rim of the torch lens with the
other, turning the rim of the lens in an anti-clockwise
direction.
Continue to turn the rim until it opened and separates it
from the body of the torch.
The burnt out bulb should be removed from the spring
and discarded appropriately.
This torch is shipped with a spare light bulb. It is stored
inside the light assembly. You can see it when you
remove the rim and light assembly. Replace this new bulb
in the spring. Carefully align the rim and light assembly
with the torch body. Twist the lens rim in a clockwise
direction to close the lens cover.
Cleaning
1. Clean the torch regularly. Before cleaning, remove
the battery pack and any accessories.To clean use
a mild soap and damp cloth on the housing. Never
immerse the torch in waster or any kind of liquid.
2. Remove dust and dirt regularly. Cleaning is best
done with compressed air or a rag.
3. Do not open the torch (other than to change the light
bulb as described above), battery or battery charger.
There are no serviceable parts. Opening the unit will
void the warranty.

CAUTION
!
Do not use caustic agents to clean the plastic parts of the
torch. A mild detergent on a damp cloth is recommended.
Water must never come into contact with the torch lamp.
General inspection
Regularly check that all fixings are tight. They may vibrate
loose over time.

WARRANTY

Thank you for investing in a HAUSSMANN power tool.
These products have been made to demanding,
high-quality standards and are guaranteed for domestic
use against manufacturing faults for a period of 36
months form the date of purchase.
This guarantee does not affect your statutory rights. In
case of any malfunction of your tool (failure, missing part,
etc.), please contact one of our service technician at our
tool free service line at 1-886-206-0888 from 8 AM
to 6 PM, Monday to Friday, Eastern time. Rona reserves
the right to repair or replace the defective tool, at its
discretion.
Normal wear and tear, including accessory wear, is not
covered under guarantee. The product is guaranteed for
36 months if used for normal trade purposes. Any
guarantee is invalid if the product has been overloaded
or subject to neglect, improper use or an attempted repair
other than by an authorized agent. Heavy-duty, daily
professional or hire usage are not guaranteed. Due to
continuous product improvement, we reserve the right to
change the product specification without prior notice.
16