Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Work area safety
1.
Keep work area clean. Cluttered areas invite
accidents.
2.
Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
3.
Keep children and bystanders away while
operating a power tool. Distractions can cause you
to lose control.
Electrical safety
1.
The charger's plug must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with grounded power tools.
Unmodified plugs and matching outlets will reduce
the risk of electric shock.
2.
Use this battery-operated tool only with its
specifically designated battery pack. The use of
any other batteries may create a risk of fire.
3.
Do not expose the lamp to rain or wet conditions.
Water entering the lamp will increase the short
circuiting.
4.
A battery-operated tool with integral batteries or
a separate battery pack must be recharged only
with the specified charger for the battery. A
charger that may be suitable for one type of battery
may create a risk of fire when used with another
battery.
Personal safety
1.
Prevent unintentional starting. Ensure the switch
is in the off-position before inserting the battery
pack, picking up or carrying the tool. Carrying
power tools with your finger on the switch or inserting
batteries in power tools that have the switch on invites
accidents.
2.
If the lamp is not used for a long time, please put
it in a dry and clean place, out of children's reach.
3.
Disconnect the battery pack from the power tool
before making any adjustments, or storing power
tools. Such preventive safety measures reduce the
risk of staring the power tool accidentally.
GENERAL INSTRUCTIONS
Battery tool use and care
1.
Recharge your tool's battery only with the
charger specified by the manufacturer. A charger
that is suitable for one type of battery pack may
create a risk of fire when used with another
battery pack.
2.
Use power tools only with their specifically
designated battery packs. The use of any other
battery packs may create a risk of injury and fire.
3.
When battery pack is not in use, keep it away
from metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects, which
can make a connection from one terminal to
another. Shorting the battery terminals together may
cause burns or a fire.
4.
Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation
or burns.
Service
1.
Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
ADDITIONAL SAFETY WARNINGS
1.
Important safety instructions for charger
1) Before using the charger, read all the instructions
and cautionary markings on the charger and battery
pack as well as the instructions on using the battery
pack.
2)
Only charge your batteries indoors as the charger is
designed for indoor use only.
3)
DANGER. If the battery pack housing is cracked or
damaged in any other way, do not insert it in the
charger. There is a danger of electric shock or
electrocution.
13
Publicité
Chapitres
Table des Matières
