KOS Box Kosmic Manuel D'emploi Et D'entretien page 16

USE OF ThE RADIO
TURNING ON
To turn the radio on or off, press the key "O" "ON/OFF".
On
ADJUSTING ThE VOLUME
To turn the volume up, press several times (or hold down) the "+"
P F M
key. To turn it down, do likewise with the key "-" (keys "T").
MANUAL STATION SEARCh
With the radio on, press key "N" once.
O
P F M T
The display will show the message "Manual Search".
You can now look for you favourite stations by pressing several
times (or holding down) the keys "+" to increase frequency or "-" to decrease. To exit manual search, do not press
any key for five seconds.
AUTOMATIC SEARCh FOR A RADIO STATION
With the radio on, press key "F" twice.
The display will show the message "Auto Search".
You can now look for you favourite stations by pressing several times the keys "+" to increase frequency or "-" to
decrease. Each time you press one of the two search keys, the radio will go to the next strongest signal from the one
where the search started. To exit automatic search, do not press any key for five seconds.
MEMORIZING A STATION
With the radio on, press key "M".
The display will show the message "Program Select" along with a flashing number at lower right. This indicates the
position in memory where the station you are listening to will be stored. If you want to change the position where
the station will be stored (eight positions are available), use the keys "+" to increase or "-" to decrease.
Once you get to the position where you want to memorize the station, press key "M"again.
The message "Memorized" will appear on the display to confirm that the operation has taken place successfully.
To exit the station memorization menu, do not press any key for five seconds.
RECALLING A MEMORIZED STATION
With the radio on, press key "P".
The display will show the message "Program Select" along with a flashing number at lower right. This number indicates
the position in memory. To change it (eight positions are available), use the keys "+" to increase or "-" to decrease.
As the display of the positions is scrolled, the bottom of the display shows the frequency that is memorized at the
current position. You will be tuned to that station. When you have found the position you want, simply do not press
any key for five seconds. The programme will be selected automatically.
SETTING ThE DIGITAL CLOCK AND CALENDAR
With the radio off, press key "M".
Each time you press this key, the parameters of the calendar and of the clock which can be set flash cyclically in the
following order: DAY > MONTH > YEAR > HOUR > MINUTES.
Using the keys "+" or "-", you can change the parameter that is flashing.
To exit clock and calendar programming, do not press any key for five seconds.
16