To Set The Timer - Panasonic CS-XE7LKEW Guide Rapide

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

TO MONITOR HUMAN PRESENCE
9
& ACTIVITY FOR ENERGY SAVING
ECO 1
ECO
PATROL
Heat Source & Movement
Set Temperature
Set Fan Speed
• — ECO 1 - To optimize comfort and energy saving.
• --- ECO 2 - To maximize energy saving.
*Applicable during COOL/DRY Mode only.
10
TO ENJOY CLEAN & FRESH AIR
PATROL
PATROL/
PATROL - To monitor air quality
• Detects air quality; e-ion operation activates when air
quality is at dirty level.
• Can be activated even when the unit is turned off.
• Patrol starts automatically with the unit switched on with
OFF/ON
.
- To freshen and purify the air
• Generates negative ions to produce fresh air effect and
attract dust which will then be captured at the positively
charged e-ion fi lters.
• Can be activated even when the unit is turned off. In this
condition, fan speed and air swing can not be adjusted.
TO ACHIEVE TEMPERATURE
11
QUICKLY
• This operation will stop automatically after 20 minutes
(For Single Split System).
XE18LKEW, XE21LKEW, E18LKEW, E21LKEW
ECO 2
ECO OFF
Low
High
None
+3°C
+2°C
COOL/
-1°C
DRY Mode
HEAT Mode
-2°C
-3°C
*≤ Medium
+1 tap
Fan
NORMAL
Press and hold for 5 seconds to dim or restore the
12
unit's indicator brightness.
Press and hold for approximately 10 seconds to
13
show temperature setting in °C or °F.
Press to restore the remote control's default setting.
14
Not used in normal operations.
15
PATROL/
QUIET
,
,
• Can be activated in all modes and can be cancelled
by pressing the respective button again.
QUIET
POWERFUL
,
• Can not be selected at the same time.
• Can not be activated during "MILD DRY COOLING"
operation is activated.

TO SET THE TIMER

TO SET THE TIMER
• 2 sets of ON and OFF timers are available to turn ON
or OFF the unit at different preset time.
• Complete below procedures to set each timer:
ON
1
OFF
Select ON or OFF timer
• Example of application at living room:
Morning: ON
OFF
Evening: ON
OFF
• To cancel ON or OFF timer, press
select respective
• If timer is cancelled manually or due to power failure,
you can restore the timer again by pressing
to select respective
6
OFF
• Upcoming timer will be displayed and will be activated
in sequence.
• When ON Timer is set, the unit may start earlier (up
to 35 minutes) before the actual set time in order to
achieve the desired temperature on time.
• Timer operation is based on the clock set in the
remote control and repeats daily once set. For clock
setting, please refer to Remote Control Preparation at
back cover.
NOTES
NOTES
ECO
POWERFUL
PATROL
,
ECO
PATROL
,
Cancel
2
Cancel
Set the
time
at 07:00 (Wake up)
at 08:00 (Out for work)
at 17:00 (Back home)
at 22:00 (Sleep)
ON
or
OFF
or
then press
.
CANCEL
or
then press
SET
Confi rm
to
ON
or
SET
.
7

Publicité

Table des Matières
loading

Table des Matières