CGM SUPERPOWER 2200I Manuel D'utilisation page 19

AC power applications
5. Connect the ground terminal
6. According to "HOW TO START" requirement starts.
7. Ensure that the required device's switch connected to the generator is OFF and then plug in the
machine at the generator outlet.
◆
If the connected device before the connection is ON, it will suddenly start, causing injury.
8. When the output indicator (green) light is up, turn on the load.
If the internal overload operation or equipment failure, the output indicator (green) will go out, the overload
indicator light (red) will light up and there is no power output; the generator will not stop, you must press
the engine start switch to "OFF" position to turn off the engine.
Be careful
19