Scope Of Supply; Main Technical Characteristics - THERMEx ID 30 V Manuel D'utilisation

BEFORE THE FIRST USING YOUR ELECTRIC STORAGE WATER
HEATER, CAREFULLY READ THIS OPERATION MANUAL
Congratulations on your purchase of an electric water heater THERMEX.
Water heaters THERMEX are designed and manufactured in strict accordance with
domestic and international standards guaranteeing operation reliability and safety.
Present manual applies to THERMEX models of ID (smart). The full name of the
model of your heater is specified in "Manufaturer's warranty" section (sub-section
"Note of sale") and in the marking plate on the heater casing.
Electric water heater (hereinafter referred to as the EWH) is designed to provide
with hot water for domestic and industrial facilities having a cold water supply line
pressure of not less than 0.05 MPa and not more than 0.8 MPa.
EWH shall be operated indoors in heated spaces and it is not designed for operation
in continuous flow mode.
Water heater
Safety valve of GP type
Operation manual
Anchors for fastening (option)
Packaging
3.
EWH power supply shall be within the range of 230 V ± 10%. Supply network
frequency 50 Hz ± 1%. Volume of the inner tank and heating element power are speci-
fied in the marking plate on the casing. Thread diameter in water inlet and outlet pipes
- G1/2 ".
The manufacturer reserves the right to make changes to the design, complete set and
specifications of the heater without prior notice.
DEAR CUSTOMER!
1. APPLICATION
2.

SCOPE OF SUPPLY

MAIN TECHNICAL CHARACTERISTICS

- 1 pcs.
- 1 pcs.
- 1 pcs.
- 1 set
- 1 pcs.
EN
ы
1