KETRON SD1000 Manuel D'instruction page 59

CTRL 93 BnH 5DH vv
CTRL 98 BnH 62H vv
CTRL 99 BnH 63H vv
CTRL 100 BnH 64H vv
CTRL 101 BnH 65H vv
CTRL 120 BnH 78H 00H
CTRL 121 BnH 79H 00H
CTRL 123 BnH 7BH 00H
CTRL 126 BnH 7EH 00H
CTRL 127 BnH 7FH 00H
CTRL CC1 BnH ccH vvH
CTRL CC2 BnH ccH vvH
RPN 0000H BnH 65H 00H 64H
00H 06H vv
RPN 0001H BnH 65H 00H 64H
01H 06H vv
RPN 0002H BnH 65H 00H 64H
02H 06H vv
NRPN 0108H BnH 63H 01H 62H
08H 06H vv
NRPN 0109H BnH 63H 01H 62H
09H 06H vv
NRPN 010AH BnN 63H 01H 62H
0AH 06H vv
NRPN 0120H Bnh 63H 01H 62H
20H 06H vv
NRPN 0121H BnH 63H 01H 62H
21H 06H vv
NRPN 0163H Bnh 63H 01H 62H
63H 06H vv
NRPN 0164H BnH 63H 01H 62H
64H 06H vv
NRPN 0166H BnH 63H 01H 62H
66H 06H vv
Standard Sysex F0H 7EH 7FH 09H
01H F7H
Chorus send level vv=00H to 7FH
NRPN low
NRPN high
RPN low
RPN high
All sound off (abrupt stop of sound on channel n)
Reset all controllers
All notes off
Mono on
Poly on (default power-up)
Assignable Controller 1. cc=Controller number (0-5Fh), vv=Control
value (0-7Fh). Control number (ccH) can be set on CC1
CONTROLLER NUMBER (Sys. Ex 40 1x 1F). The resulting effect is
determined by CC1 controller function (Sys.Ex. 40 2p 40-4A)
Assignable Controller 2. cc=Controller number (00h-5Fh), vv=control
value (0-7Fh). Control number can be set on CC2 CONTROLLER
NUMBER (Sys.Ex. 40 1x 20). The resulting effect is determined by
CC2 controller function (Sys.Ex.40 2p 50-5A).
Pitch bend sensitivity in semitones (default=2)
Fine tuning in cents (vv=00 -100, vv=40H 0, vv=7FH +100
Coarse tuning in half-tones (vv=00 -64, vv=40H 0, vv=7FH +64
Vibrate rate modify (vv=40H -> no modif)
Vibrate depth modify (vv=40H -> no modif)
Vibrate delay modify (vv=40H -> no modif)
TVF cutoff freq modify(vv=40H -> no modif)
TVF resonance modify (vv=40H -> no modif)
Env. attack time modify(vv=40H ->no modif)
Env. decay time modify(vv=40H -> no modif)
Env. release time modif(vv=40H ->no modif)
General MIDI reset (note 4)